Rothenberger Flaring Tools and Flaring Sets

 

HAND TOOLS Previous PagePrevious PageNext PageNext page
 


Rothenberger also produces a ROFLARE Swing Release Flaring Tool for 45-degree and 37-degree single flares on the same tubing materials as the Stationary Flaring Tool takes. When used in conjunction with ROFLARE double-flare inserts, it's also possible to produce 45-degree and 180-degree double flares. The Swing Release Flaring Tool also features a hardened cone and clamp jaws.

Rothenberger brings refrigeration specialists, in particular, its ROFORM Set Flaring and Swaging for Hard & Soft Copper. The tool lets you create 45-degree single flares and sockets on soft- and hard-drawn copper tubing, plus brass, aluminum, and thin-walled steel piping. You'll save on fittings, soldering, and labor with this one. The universal coupling with spherical locking device is great for simple, rapid changeover of your cone and expander pin.

The Rothenberger Standard Flaring Tool is also a sure bet with its self-centering clamp, non-slip tubing, and hardened flare cone. Over 50 years of innovation and superior engineering have gone into Rothenberger tools so the quality is unbeatable. Contact our staff at CSC Industrial to order your Rothenberger flaring tools, or order by fax at 915-760-4832. We also make it easy to order online whenever you're ready.
   
NEW! Professional Reeling Flaring Tool
For producing precision 45° single flares on copper tubes
  1. Made from forged steel: TOUGH AND LONG LASTING
  2. Self-centering mold: HIGHEST FLARE PRECISION
  3. Flare cone rotates off-center in needle bearings: CONTROLLED EXPANDING AND SHAPING OF TUBE END WITHOUT TEARING
  4. Spring-loaded side coupling: NO REDUCTION IN WALL THICKNESS


inch OD

No.

$
Price

Add to Cart
1/8", 1/16", 1/4", 5/16", 3/8", 1/2", 5/8" & 3/4"

222402

$139.00
   
NEW! Rothenberger Universal Flaring Tool
For producing precision 45° single flares on copper tubes, set includes universal flaring tool for all diameters, 3/16" - 5/8" in a plastic case.
  • Self centering tube clamp for all diameters
  • Universal application and highest flare precision
  • Hardened flare cone with special geometry
  • Controlled flaring without tearing, forming perfect surfaces


inch OD

No.

$
Price

Add to Cart

3/16" - 5/8"

222601

$46.90

Rothenberger ROFLARE Swing Release Flaring Tool

 Rothenberger ROFLARE
Swing Release Flaring Tool
Precision production of 45° and 37° single flares on copper, brass, aluminum and soft steel tubes. Perfect for refrigeration work. 45° and 180° double flares are also possible when used in conjunction with ROFLARE double-flare inserts; "Multiblock" multi-clamping facility and secure eccentric quick tensioning device for tubes. Hardened clamp jaws and cone. Automatic self-centering.
Type
inch OD
lbs. 		No. $
Price		 Add to Cart
 45°  6 - 8 - 10 - 12 - 15 - 16 mm  2.50  26022 $86.90
 45°  3/16" - 1/4" - 5/16" - 3/8" - 1/2" - 5/8"  2.50  26033 $69.90
 37°  3/16" - 1/4" - 5/16" - 3/8" - 1/2" - 5/8"  2.50  26032 $69.90
         

 

Rothenberger ROFLARE


Rothenberger Double Flare Insert
Double flare insert with tube depth stop for tube clamping.

Rothenberger Adapter 180 degree

Adapter 180°

Rothenberger ROFLARE
45° Double Flare Inserts / 180° Adapter
Suitable for ROFLARE flaring tools as well as ROFORM flaring and swaging sets.
Type
inch OD
lbs. 		No. $
Price		 Add to Cart
 DF  3/16" - 1/4" - 5/16" - 3/8" - 1/2"  .25  26034 $24.90
 AD  Adapter for 180° flares  .10  26039 $10.00
         

 

 Rothenberger ROFORM Set

 Rothenberger ROFORM Set

Extended application possible using ROFLARE double flare inserts for 45° and 180° double flares (please order separately).		 Rothenberger ROFORM Set
Flaring and Swaging for Hard & Soft Copper
Precision production of 45° single flares and sockets on soft and hard drawn copper tubing; brass, aluminum and thin walled steel piping.
 Key features

  • Specially designed for refrigeration work

  • Compact design - perfect for use in confined spaces

  • Gentle, precision expanding

  • Savings on fittings, soldering and labor

  • "Multiblock" multi-clamping facility

  • Secure eccentric quick-tensioning device

  • Automatic self-centering

  • Universal coupling with spherical locking device for simple rapid changeover of cone and expander pin

Supplied in plastic case containing: basic tool, 45° cone expander pin, internal / external deburrer for Ø 4 - 36 mm (1/8 - 1 3/8");
TUBE CUTTER 28 for Ø 3 - 28 mm (1/8 - 1 1/8")

Type
inch OD
lbs. 		No. $
Price		 Add to Cart
 ROFORM  6 - 8 - 10 - 12 - 14 - 16 mm  5.00  26711 $159.00
 ROFORM  6 - 8 - 10 - 12 - 15 - 16 mm  5.00  26710 $149.00
 ROFORM  3/16"-1/4"-5/16"-3/8"-1/2"-5/8"  5.00  26715 $154.00
         
 
HAND TOOLS

Previous PagePrevious PageNext PageNext page

 
Flaring Tools

TOLL FREE: 1-866-496-7268
Orders Fax: 1-915-760-4832

 

All content © Copyright 2010 CSC Industrial